| CQJX |
NOMINAL THREAD SIZE |
0.112 INCHES |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-92 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABXF |
SHAFT LENGTH |
1.000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ |
SHAFT TYPE |
ROUND SINGLE SHAFT |
| ABKW |
OVERALL HEIGHT |
1.219 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.938 INCHES NOMINAL |
| CTGN |
CAPACITANCE RANGE IN PICOFARADS |
+3.0/+10.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
PLATE-MESHING |
| ABMK |
OVERALL WIDTH |
0.938 INCHES NOMINAL |
| CTGP |
NONDERATED VOLTAGE RATING AND TYPE |
600.0 DC CONTINUOUS SINGLE SECTION |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.656 INCHES NOMINAL |
| CTGR |
ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY |
1 SHAFT |
| AXGR |
ADJUSTMENT DEVICE TORQUE |
2.500 INCH-OUNCES MINIMUM AND 10.000 INCH-OUNCES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL SINGLE SHAFT |
| AKNA |
INCLOSURE TYPE |
UNINCLOSED |
| AXCM |
TUNING CHARACTERISTIC |
STRAIGHT LINE CAPACITY SINGLE SECTION |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED HOLE |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
1 TAB, SOLDER LUG AND 2 SOLDER STUD |
| ADAQ |
BODY LENGTH |
0.938 INCHES MAXIMUM |
| AECJ |
QUALITY FACTOR AT 25 DEG CELSIUS |
1500.0 |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.112 INCHES NOMINAL |
| AXGJ |
ADJUSTMENT DEVICE ROTATION |
180.0 DEGREES NOMINAL CLOCKWISE |