| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED MOUNTING HOLES |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
1500.0 MEGOHMS |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
200.000 PICOFARADS SINGLE SECTION |
| ABJT |
TERMINAL LENGTH |
0.940 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
10000.0 MEGOHMS |
| CRTP |
TOLERANCE RANGE PER SECTION |
-2.00/+2.00 PERCENT SINGLE SECTION |
| AAQL |
BODY STYLE |
W/MTG HOLE(S)/SLOT(S), TERMINALS ON OPPOSITE SURFACES |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.307 INCHES MINIMUM AND 1.317 INCHES MAXIMUM |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-5/7 GOVERNMENT SPECIFICATION |
| ADAT |
BODY WIDTH |
1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.310 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.008 |
| ABMK |
OVERALL WIDTH |
1.100 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.310 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
2500.0 DC SINGLE SECTION |
| ABHP |
OVERALL LENGTH |
2.100 INCHES MINIMUM AND 2.280 INCHES MAXIMUM |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ADAQ |
BODY LENGTH |
1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-5 SPECIFICATION |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |