| CRTP |
TOLERANCE RANGE PER SECTION |
-5.00/+5.00 PERCENT SINGLE SECTION |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.1000 |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
13499-913-5312-00 DRAWING |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
-30.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
100000.0 MEGOHMS |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| AEBS |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER |
0.250 INCHES NOMINAL |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
39.000 PICOFARADS SINGLE SECTION |
| AEBT |
TERMINAL DIAMETER |
0.020 INCHES NOMINAL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
200.0 DC SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.109 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| ADAQ |
BODY LENGTH |
0.390 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.202 INCHES MAXIMUM |
| CWQF |
QUALITY FACTOR AT REFERENCE TEMP |
1500.0000 |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |