| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 ALL SECTIONS |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
50.0 DC ALL SECTIONS |
| ABMK |
OVERALL WIDTH |
0.185 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 UNINSULATED WIRE LEAD |
| ADAT |
BODY WIDTH |
0.185 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AARF |
MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR |
C |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.1500 |
| CRTP |
TOLERANCE RANGE PER SECTION |
-2.00/+2.00 PERCENT ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
10000.0 MEGOHMS |
| ABJT |
TERMINAL LENGTH |
1.500 INCHES MINIMUM |
| BWGP |
SECTION QUANTITY |
2 |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
0.0 ALL SECTIONS |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
10000.000 PICOFARADS ALL SECTIONS |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.075 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.375 INCHES MINIMUM AND 0.425 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| CWJK |
CASE MATERIAL |
PLASTIC |
| AEBT |
TERMINAL DIAMETER |
0.025 INCHES NOMINAL |