| CRTP |
TOLERANCE RANGE PER SECTION |
-5.00/+5.00 PERCENT SINGLE SECTION |
| ADAU |
BODY HEIGHT |
2.875 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT (NON-CORE) |
3.875 INCHES NOMINAL |
| AEBN |
LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
300.0 |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
600.0 DC SINGLE SECTION |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
+0.0/+70.0 SINGLE SECTION |
| AEBU |
TERMINAL HEIGHT FROM BODY |
1.000 INCHES NOMINAL |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.266 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
3.000 INCHES NOMINAL |
| AAQL |
BODY STYLE |
W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE |
| AEBL |
HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
3000.0 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABMK |
OVERALL WIDTH (NON-CORE) |
2.375 INCHES NOMINAL |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
0.400 MICROFARADS SINGLE SECTION |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.625 INCHES NOMINAL |
| AEBK |
MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS |
18.0 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 STANDOFF, SOLDER STUD |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.438 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
3.562 INCHES NOMINAL |
| AEBM |
MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS |
15.0 |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
3 UNTHREADED MOUNTING HOLES |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ABHP |
OVERALL LENGTH (NON-CORE) |
4.000 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
2.375 INCHES NOMINAL |