| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.100 INCHES NOMINAL |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AEBT |
TERMINAL DIAMETER |
0.016 INCHES NOMINAL |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
3.300 PICOFARADS SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAT |
BODY WIDTH |
0.100 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.500 INCHES MINIMUM |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| ABKW |
OVERALL HEIGHT (NON-CORE) |
0.100 INCHES MAXIMUM |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ADAU |
BODY HEIGHT |
0.100 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH (NON-CORE) |
0.225 INCHES MAXIMUM |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
2500.0 MEGOHM-MICROFARADS |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
-150.0 SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| ABHP |
OVERALL LENGTH (NON-CORE) |
0.100 INCHES MAXIMUM |
| CRTP |
TOLERANCE RANGE PER SECTION |
-0.10/+0.10 PICOFARADS SINGLE SECTION |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
100.0 DC SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.100 INCHES MAXIMUM |
| CWQF |
QUALITY FACTOR AT REFERENCE TEMP |
1000.0000 |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |