| CQBQ |
CAPACITANCE VALUE PER SECTION |
0.001 MICROFARADS SINGLE SECTION |
| ABMK |
OVERALL WIDTH |
0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 PIN |
| ADAU |
BODY HEIGHT |
0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-30.0/+30.0 SINGLE SECTION |
| CWSG |
TERMINAL SURFACE TREATMENT |
NICKEL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
50.0 DC SINGLE SECTION |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| ABHP |
OVERALL LENGTH |
0.485 INCHES MAXIMUM AND 0.515 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.265 INCHES MINIMUM AND 0.325 INCHES MAXIMUM |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
-200.0 SINGLE SECTION |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| AGAV |
END ITEM IDENTIFICATION |
SH-60B ACFT |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
30.0 MEGOHMS |
| AEBT |
TERMINAL DIAMETER |
0.020 INCHES NOMINAL |
| CRTP |
TOLERANCE RANGE PER SECTION |
-1.00/+1.00 PERCENT SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWSS |
DIELECTRIC MATERIAL |
PLASTIC POLYPARAXYLENE |