| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
50.0 DC SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
1000.0 MEGOHM-MICROFARADS |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
1.000 MICROFARADS SINGLE SECTION |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
100.0 MEGOHM-MICROFARADS |
| ABHP |
OVERALL LENGTH |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CRTP |
TOLERANCE RANGE PER SECTION |
-10.00/+10.00 PERCENT SINGLE SECTION |
| AEBT |
TERMINAL DIAMETER |
0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
2.500 |
| ABMK |
OVERALL WIDTH |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| ADAQ |
BODY LENGTH |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ABKW |
OVERALL HEIGHT |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CQFB |
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE |
-25.0/+15.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ADAT |
BODY WIDTH |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |