| CRTP |
TOLERANCE RANGE PER SECTION |
-5.00/+5.00 PERCENT SINGLE SECTION |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
2000.0 DC SINGLE SECTION |
| ADAT |
BODY WIDTH |
4.470 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT (NON-CORE) |
0.875 INCHES MAXIMUM |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.630 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 SOLDER STUD |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.156 INCHES NOMINAL |
| AAQL |
BODY STYLE |
W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE |
| ADAQ |
BODY LENGTH |
1.970 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
4.063 INCHES NOMINAL |
| CQJJ |
NONDERATED OPERATING TEMP |
0.0 DEG CELSIUS MINIMUM AND 65.0 DEG CELSIUS MAXIMUM |
| ADAU |
BODY HEIGHT |
0.875 INCHES MAXIMUM |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
5000.0 MEGOHM-MICROFARADS |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.0050 |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.375 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH (NON-CORE) |
4.470 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH (NON-CORE) |
2.720 INCHES NOMINAL |
| ABJT |
TERMINAL LENGTH |
0.380 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
RADAR SET AN/SPS-67(V)1 |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
1.100 MICROFARADS SINGLE SECTION |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
-500.0/+500.0 SINGLE SECTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED MOUNTING HOLES |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |