| AEBD |
TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS |
-900.0/+900.0 SINGLE SECTION |
| CTGP |
NONDERATED VOLTAGE RATING AND TYPE |
250.0 DC CONTINUOUS SINGLE SECTION |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
TERMINAL SURFACES GOLD AND ELECTRODES PALLADIUM AND ELECTRODES SILVER |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AEBS |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER |
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 PRINTED CIRCUIT |
| ABPM |
BODY DIAMETER |
0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CTGS |
CAPACITANCE DRIFT IN PICOFARADS |
0.50 SINGLE SECTION |
| CTGN |
CAPACITANCE RANGE IN PICOFARADS |
+7.0/+40.0 SINGLE SECTION |
| AXGR |
ADJUSTMENT DEVICE TORQUE |
0.200 INCH-OUNCES MINIMUM AND 2.000 INCH-OUNCES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
GOLD AND PALLADIUM AND SILVER |
| ABJT |
TERMINAL LENGTH |
0.135 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| AEBX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER |
0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AEBC |
TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS |
-1500.0 SINGLE SECTION |
| CTGR |
ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY |
1 SQUARE HOLE |
| AAQL |
BODY STYLE |
ROTARY |
| AFWY |
TERMINAL THICKNESS |
0.004 INCHES MINIMUM AND 0.006 INCHES MAXIMUM |
| AXGT |
INSULATION DC RESISTANCE AT 25 DEG CELSIUS |
10000.0 MEGOHMS |
| MATT |
MATERIAL |
METAL BASE |
| AKNA |
INCLOSURE TYPE |
ENCASED |
| ADAU |
BODY HEIGHT |
0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 TERMINAL |
| AECJ |
QUALITY FACTOR AT 25 DEG CELSIUS |
200.0 |
| AFWW |
TERMINAL WIDTH |
0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |