| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
500.0 DC SINGLE SECTION |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
5.100 PICOFARADS SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.135 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-55681 SPECIFICATION |
| ABHP |
OVERALL LENGTH (NON-CORE) |
0.135 INCHES NOMINAL |
| AEBT |
TERMINAL DIAMETER |
0.016 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
ESTABLISHED |
| AARH |
RELIABILITY FAILURE RATE LEVEL IN PERCENT |
0.010 |
| CRTP |
TOLERANCE RANGE PER SECTION |
-2.00/+2.00 PERCENT SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.110 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT |
0.030 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH (NON-CORE) |
0.110 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-55681/5 GOVERNMENT SPECIFICATION |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| ADAU |
BODY HEIGHT |
0.030 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.050 |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-20.0/+20.0 SINGLE SECTION |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CWJK |
CASE MATERIAL |
CERAMIC OR GLASS |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
1000000.0 MEGOHMS |
| ABJT |
TERMINAL LENGTH |
0.500 INCHES MINIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
90.0 SINGLE SECTION |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
100000.0 MEGOHMS |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |