| CQBQ |
CAPACITANCE VALUE PER SECTION |
2.700 PICOFARADS SINGLE SECTION |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-250.0/+250.0 SINGLE SECTION |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-20/35 GOVERNMENT SPECIFICATION |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.100 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.150 |
| AARG |
RELIABILITY INDICATOR |
ESTABLISHED |
| AARH |
RELIABILITY FAILURE RATE LEVEL IN PERCENT |
0.010 |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES NOMINAL |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-20 SPECIFICATION |
| ADAQ |
BODY LENGTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AEBT |
TERMINAL DIAMETER |
0.027 INCHES MAXIMUM |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ABKW |
OVERALL HEIGHT |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
0.0 SINGLE SECTION |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
200.0 DC SINGLE SECTION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CRTP |
TOLERANCE RANGE PER SECTION |
-0.50/+0.50 PICOFARADS SINGLE SECTION |
| ABMK |
OVERALL WIDTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CWJK |
CASE MATERIAL |
PLASTIC |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |