| CTGP |
NONDERATED VOLTAGE RATING AND TYPE |
250.0 DC CONTINUOUS SINGLE SECTION |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 PRINTED CIRCUIT |
| AECK |
DISSIPATION FACTOR AT 25 DEG CELSIUS IN PERCENT |
0.2 |
| ABJT |
TERMINAL LENGTH |
0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AEBD |
TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS |
-600.0/+600.0 SINGLE SECTION |
| CTGN |
CAPACITANCE RANGE IN PICOFARADS |
+2.5/+10.0 SINGLE SECTION |
| AFWY |
TERMINAL THICKNESS |
0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM |
| CTGR |
ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY |
1 SQUARE HOLE |
| AAQL |
BODY STYLE |
ROTARY |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-81 SPECIFICATION |
| ADAU |
BODY HEIGHT |
0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AEBX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER |
0.140 INCHES NOMINAL |
| AXGT |
INSULATION DC RESISTANCE AT 25 DEG CELSIUS |
10000.0 MEGOHMS |
| AKNA |
INCLOSURE TYPE |
ENCASED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-81/9B GOVERNMENT SPECIFICATION |
| AECJ |
QUALITY FACTOR AT 25 DEG CELSIUS |
1000.0 |
| AEBS |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER |
0.140 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 TERMINAL |
| APXH |
TERMINAL LOCATION |
END OPPOSITE ADJUSTMENT CONTROL PERPENDICULAR |
| AXGR |
ADJUSTMENT DEVICE TORQUE |
0.050 INCH-OUNCES MINIMUM AND 1.000 INCH-OUNCES MAXIMUM |
| ABPM |
BODY DIAMETER |
0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AEBC |
TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS |
100.0 SINGLE SECTION |