| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
50.0 DC SINGLE SECTION |
| ADAQ |
BODY LENGTH |
0.285 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.275 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
ESTABLISHED |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
0.180 MICROFARADS SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-55514 SPECIFICATION |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| ABHP |
OVERALL LENGTH |
0.285 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| ADAU |
BODY HEIGHT |
0.085 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
500000.0 MEGOHMS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.300 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-55514/8 GOVERNMENT SPECIFICATION |
| CQBF |
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
7000.0 MEGOHM-MICROFARADS |
| CRTP |
TOLERANCE RANGE PER SECTION |
-1.00/+1.00 PERCENT SINGLE SECTION |
| AARH |
RELIABILITY FAILURE RATE LEVEL IN PERCENT |
1.000 |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ADAT |
BODY WIDTH |
0.275 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AEBT |
TERMINAL DIAMETER |
0.019 INCHES MINIMUM AND 0.024 INCHES MAXIMUM |
| CWSS |
DIELECTRIC MATERIAL |
PLASTIC |
| CWSG |
TERMINAL SURFACE TREATMENT |
SOLDER |