| TEST |
TEST DATA DOCUMENT |
10001-2515586 DRAWING |
| ADAU |
BODY HEIGHT |
1.500 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.112 INCHES |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| CQFC |
SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
143.00 KILOHERTZ BLANK AND 147.20 KILOHERTZ BLANK AND 147.80 KILOHERTZ BLANK AND 152.00 KILOHERTZ BLANK |
| AHAQ |
SOURCE IMPEDANCE RATING PER FUNCTION |
1.0 KILOHMS BLANK |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
147.20 KILOHERTZ BLANK AND 147.80 KILOHERTZ BLANK |
| ADAT |
BODY WIDTH |
1.010 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 THREADED STUD |
| CRDC |
MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE |
100.0 VOLTS AT SEA LEVEL |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
147.5 KILOHERTZ BLANK |
| ADAQ |
BODY LENGTH |
1.920 INCHES MAXIMUM |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
0.959 INCHES MINIMUM AND 0.991 INCHES MAXIMUM |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 TAB, SOLDER LUG OUTPUT |
| AFGA |
OPERATING TEMP RANGE |
+0.0/+75.0 DEG CELSIUS |
| AHAS |
LOAD IMPEDANCE PER FUNCTION |
1.0 KILOHMS BLANK |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG GROUND |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
3.5 BLANK |
| CRBC |
DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
30.0 MINIMUM BLANK AND 1.0 MAXIMUM BLANK AND 1.0 MAXIMUM BLANK AND 30.0 MINIMUM BLANK |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.440 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.906 INCHES MAXIMUM |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 TAB, SOLDER LUG INPUT |