| ABDM |
TERMINAL MATERIAL |
ANY ACCEPTABLE |
| AFRG |
CONTACT MATERIAL |
ANY ACCEPTABLE |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| AGVB |
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH |
0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
DRIPPROOF |
| AGUK |
ACCOMMODATED FERRULE DIAMETER |
0.250 INCHES NOMINAL |
| AAFZ |
BODY MATERIAL |
PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE SDG |
| ABTJ |
MOUNTING HOLE QUANTITY |
2 |
| AGVK |
CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES |
0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 THREADED STUD |
| ELEC |
VOLTAGE IN VOLTS |
250.0 |
| ABMK |
OVERALL WIDTH |
1.180 INCHES MINIMUM AND 1.185 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-F-19207 SPECIFICATION |
| AFXH |
INTERRUPTION INDICATOR METHOD |
INCANDESCENT LAMP |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-F-19207/18 GOVERNMENT SPECIFICATION |
| AGUT |
LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE |
0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
PANEL MOUNTED TYPE |
| ABHP |
OVERALL LENGTH |
3.750 INCHES MINIMUM AND 4.000 INCHES MAXIMUM |
| AGUJ |
ACCOMMODATED FUSE LENGTH |
1.250 INCHES NOMINAL |
| AGUN |
RESISTOR RATING |
1.8 KILOHMS |
| ABDN |
TERMINAL SURFACE TREATMENT |
ANY ACCEPTABLE |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| ABTB |
MOUNTING HOLE DIAMETER |
0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| CSNM |
FUSE TERMINAL TYPE ACCOMMODATED |
FERRULE |
| AFRH |
CONTACT SURFACE TREATMENT |
SILVER PLATED, QQ-S-365 |
| ABKW |
OVERALL HEIGHT |
1.812 INCHES MINIMUM AND 1.817 INCHES MAXIMUM |
| AGVF |
BUSHING HOLE DIAMETER |
0.869 INCHES MINIMUM AND 0.879 INCHES MAXIMUM |
| AEVB |
MOUNTING HOLE STYLE |
2 BUSHING MOUNTING W/2 HOLES |
| AGUP |
INDICATING LAMP VOLTAGE RANGE IN VOLTS |
+61.0/+80.0 |
| AGUE |
FUSE ACCOMMODATION QUANTITY |
2 |
| CQJL |
CURRENT CARRYING RATING IN AMPS |
30.0 |
| AGVM |
CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE |
0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |