| FREQ |
FREQUENCY IN HERTZ |
400.0 ALL LOCATIONS |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.835 INCHES MINIMUM AND 1.845 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB, SOLDER LUG |
| CPRK |
AUXILIARY TRIP COIL VOLTAGE TYPE AND RATING IN VOLTS |
24.0 DC MAXIMUM SECOND LOCATION |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
1000.0 AC ALL LOCATIONS |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| AKPX |
POLE QUANTITY |
3 |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP FIRST LOCATION |
| CPRY |
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT |
ONE, TWO, AND THREE LINKED |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
30.0 AMPERES AC ALL LOCATIONS |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
3 TOGGLE |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.200 MINIMUM AT 200 PCT ALL LOCATIONS AND 2.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP THIRD LOCATION |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| AJEC |
BOSS HEIGHT |
0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| ADAQ |
BODY LENGTH |
1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.655 INCHES MINIMUM AND 1.665 INCHES MAXIMUM |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CQQC |
TRIP RELEASE DUTY CYCLE |
INTERMITTENT SECOND LOCATION |
| CPRQ |
RESET METHOD |
MANUAL |
| ADAT |
BODY WIDTH |
2.245 INCHES MINIMUM AND 2.255 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
6 THREADED HOLE |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC-HYDRAULIC ALL LOCATIONS |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP W/AUXILIARY LOAD TERMINAL AND REMOTE TRIP FEATURE SECOND LOCATION |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.555 INCHES MINIMUM AND 1.565 INCHES MAXIMUM |
| APNQ |
ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT EACH POLE |
| AAQL |
BODY STYLE |
MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
150.0 ALL LOCATIONS |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
250.0 AC ALL LOCATIONS |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
DUSTPROOF |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |