| CQJX |
NOMINAL THREAD SIZE |
0.469 INCHES |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT SINGLE LOCATION |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
138.0 SINGLE LOCATION |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.400 MINIMUM AT 200 PCT SINGLE LOCATION AND 3.000 MAXIMUM AT 200 PCT SINGLE LOCATION |
| AAQL |
BODY STYLE |
SINGLE POLE TYPE |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
SHOCK RESISTANT AND VIBRATION RESISTANT AND EXPLOSION PROOF |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP SINGLE LOCATION |
| ADAQ |
BODY LENGTH |
1.187 INCHES MAXIMUM |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| PKWT |
UNPACKAGED UNIT WEIGHT |
0.100 POUNDS |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
1.0 AMPERES AC SINGLE LOCATION AND 1.0 AMPERES DC SINGLE LOCATION |
| ADTV |
CASE MATERIAL |
PLASTIC |
| AKPX |
POLE QUANTITY |
1 |
| CPRQ |
RESET METHOD |
MANUAL |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.843 INCHES MAXIMUM |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
600.0 AC SINGLE LOCATION AND 6000.0 DC SINGLE LOCATION |
| ABXD |
BUSHING LENGTH |
0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| CPRJ |
TRIP RELEASE METHOD |
THERMAL SINGLE LOCATION |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 PUSH-PULL |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
120.0 AC SINGLE LOCATION AND 30.0 DC SINGLE LOCATION |
| FREQ |
FREQUENCY IN HERTZ |
400.0 SINGLE LOCATION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED BUSHING W/PANEL SEAL |
| ADAT |
BODY WIDTH |
0.750 INCHES MAXIMUM |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.669 INCHES MINIMUM AND 0.731 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
1 TAB W/SCREW |
| CBME |
CUBIC MEASURE |
2.255 CUBIC INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY SINGLE LOCATION |
| CRCF |
TRIP RELEASE AMBIENT TEMP RATING |
25.0 DEG CELSIUS NOMINAL SINGLE LOCATION |