| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.375 INCHES NOMINAL |
| FREQ |
FREQUENCY IN HERTZ |
60.0 SINGLE LOCATION |
| ADAT |
BODY WIDTH |
1.469 INCHES NOMINAL |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT SINGLE LOCATION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 SCREW |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
INSTANTANEOUS SINGLE LOCATION AND TIME DELAY SINGLE LOCATION |
| ADAQ |
BODY LENGTH |
3.219 INCHES NOMINAL |
| AAQL |
BODY STYLE |
SINGLE POLE TYPE |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
2.375 INCHES NOMINAL |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP SINGLE LOCATION |
| ABTD |
MOUNTING SLOT WIDTH |
0.164 INCHES NOMINAL |
| CPRP |
ULTIMATE TRIP TIME PER POLE IN SECONDS |
1.550 MINIMUM SINGLE LOCATION AND 7.000 MAXIMUM SINGLE LOCATION |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
150.0 MILLIAMPERES AC SINGLE LOCATION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED HOLE AND 1 UNTHREADED HOLE |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC SINGLE LOCATION |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
115.0 AC SINGLE LOCATION |
| ADAU |
BODY HEIGHT |
2.656 INCHES NOMINAL |
| ADTV |
CASE MATERIAL |
PLASTIC |
| AKPX |
POLE QUANTITY |
1 |
| CPRQ |
RESET METHOD |
MANUAL |
| AJEC |
BOSS HEIGHT |
0.125 INCHES NOMINAL |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.350 MINIMUM AT 200 PCT SINGLE LOCATION AND 1.000 MAXIMUM AT 200 PCT SINGLE LOCATION |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
2000.0 AC SINGLE LOCATION |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
125.0 SINGLE LOCATION |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.140 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |