| FREQ |
FREQUENCY IN HERTZ |
400.0 ALL LOCATIONS |
| ADAQ |
BODY LENGTH |
1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| AEFQ |
NONTURN DEVICE LENGTH |
0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP ALL LOCATIONS |
| BBRJ |
SPECIAL HANDLING FEATURE |
MAGNETIC |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
1000.0 AC ALL LOCATIONS |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE TWO |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.499 INCHES MINIMUM AND 1.561 INCHES MAXIMUM |
| ABXD |
BUSHING LENGTH |
0.464 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| AKPX |
POLE QUANTITY |
3 |
| CPRZ |
AUXILIARY SWITCH FUNCTION AND QUANTITY |
1 ALARM |
| CSWP |
SWITCH VOLTAGE RATING AND TYPE IN VOLTS |
250.0 AC AND 50.0 DC |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
7.5 AMPERES AC ALL LOCATIONS |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-55629/22 GOVERNMENT SPECIFICATION |
| THSD |
THREAD SERIES DESIGNATOR |
UN |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
2.100 MINIMUM AT 200 PCT ALL LOCATIONS AND 20.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| CSSX |
SWITCH CURRENT RATING AND TYPE IN AMPS |
10.0 AC AND 2.0 DC |
| ADAT |
BODY WIDTH |
2.265 INCHES MAXIMUM |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| AEGJ |
SWITCH CONTACT ARRANGEMENT |
SINGLE POLE, DOUBLE THROW |
| AEFN |
NONTURN DEVICE LOCATION |
AT 9 OCLOCK AND AT 3 OCLOCK AND AT 12 OCLOCK |
| CQSM |
SWITCH LOCATION AND POSITION DESIGNATION |
INTERNAL AT POLE ONE |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
240.0 AC ALL LOCATIONS |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
FUNGUS RESISTANT |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRQ |
RESET METHOD |
MANUAL |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC ALL LOCATIONS |
| CRTK |
SWITCH TERMINAL TYPE |
TAB, SOLDER LUG |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 TAB W/SCREW |
| AEFS |
NONTURN DEVICE DIAMETER |
0.138 INCHES NOMINAL |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
125.0 ALL LOCATIONS |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.232 INCHES MAXIMUM |
| APNQ |
ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED BUSHING W/PANEL SEAL |
| AAQL |
BODY STYLE |
MULTIPOLE-SINGLE ACTUATOR TYPE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-55629 SPECIFICATION |
| AEFR |
NONTURN DEVICE WIDTH |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |