| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
240.0 AC SINGLE LOCATION AND 50.0 DC SINGLE LOCATION |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT SINGLE LOCATION |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
150.0 SINGLE LOCATION |
| AAQL |
BODY STYLE |
SINGLE POLE TYPE |
| FREQ |
FREQUENCY IN HERTZ |
60.0 SINGLE LOCATION OR 400.0 SINGLE LOCATION |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-39019/1 GOVERNMENT SPECIFICATION |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP SINGLE LOCATION |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
0.500 MINIMUM AT 200 PCT SINGLE LOCATION AND 9.000 MAXIMUM AT 200 PCT SINGLE LOCATION |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC SINGLE LOCATION |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
500.0 MILLIAMPERES AC SINGLE LOCATION AND 500.0 MILLIAMPERES DC SINGLE LOCATION |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
FUNGUS RESISTANT |
| AKPX |
POLE QUANTITY |
1 |
| CPRQ |
RESET METHOD |
MANUAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 WIRE HOOK |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| APNQ |
ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.700 INCHES MAXIMUM |
| ADTV |
CASE MATERIAL |
METAL |
| CBBL |
FEATURES PROVIDED |
HIGH INRUSH PROTECTION |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
| ABXD |
BUSHING LENGTH |
0.349 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-39019 SPECIFICATION |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED BUSHING W/PANEL SEAL |
| ADAQ |
BODY LENGTH |
1.562 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY SINGLE LOCATION |
| ADAT |
BODY WIDTH |
0.625 INCHES MAXIMUM |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.906 INCHES MAXIMUM |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
300.0 AC SINGLE LOCATION AND 500.0 DC SINGLE LOCATION |