| ADAQ |
BODY LENGTH |
1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| AEFP |
NONTURN DEVICE RADIUS |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
1000.0 AC ALL LOCATIONS |
| FREQ |
FREQUENCY IN HERTZ |
60.0 ALL LOCATIONS |
| BBRG |
STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE TWO |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.499 INCHES MINIMUM AND 1.561 INCHES MAXIMUM |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.745 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
| AKPX |
POLE QUANTITY |
3 |
| AFJN |
FRAGILITY FACTOR |
MODERATELY RUGGED |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UN |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
5.0 AMPERES AC ALL LOCATIONS |
| ADAT |
BODY WIDTH |
2.265 INCHES MAXIMUM |
| AEFS |
NONTURN DEVICE DIAMETER |
0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.189 INCHES MINIMUM AND 2.251 INCHES MAXIMUM |
| AEFQ |
NONTURN DEVICE LENGTH |
0.115 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| ABXD |
BUSHING LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
240.0 AC ALL LOCATIONS |
| CPRQ |
RESET METHOD |
MANUAL |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
RELAY TRIP ALL LOCATIONS |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC ALL LOCATIONS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
12 TAB, SOLDER LUG |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
9.500 MINIMUM AT 200 PCT ALL LOCATIONS AND 70.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
125.0 ALL LOCATIONS |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| APNQ |
ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| ADTV |
CASE MATERIAL |
METAL |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| AEFN |
NONTURN DEVICE LOCATION |
AT 12 OCLOCK AND AT 3 OCLOCK AND AT 9 OCLOCK |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED BUSHING W/PANEL SEAL |
| AAQL |
BODY STYLE |
MULTIPOLE-SINGLE ACTUATOR TYPE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
DUSTPROOF |