| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL 1ST ACTUATOR |
| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL AND 250.0 MILLIAMPERES INDUCTIVE LOAD AC AT SEA LEVEL |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| AKPY |
THROW QUANTITY |
3 EACH SECTION REAR |
| ABXF |
SHAFT LENGTH |
0.625 INCHES NOMINAL 1ST ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED 2ND ACTUATOR |
| ABXF |
SHAFT LENGTH |
1.000 INCHES NOMINAL 2ND ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 3:00 O'CLOCK |
| CRSJ |
SHAFT TYPE |
ROUND, HOLLOWED, FLATTED 1ST ACTUATOR |
| CQTH |
ROTOR THROUGH CONNECTION QUANTITY |
1 EACH SECTION |
| ABNC |
FLAT HEIGHT |
0.219 INCHES NOMINAL 1ST ACTUATOR |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL |
| ABHP |
OVERALL LENGTH |
2.538 INCHES MINIMUM AND 2.927 INCHES MAXIMUM |
| ABWV |
SHAFT DIAMETER |
0.125 INCHES NOMINAL 2ND ACTUATOR |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| ABNB |
FIRST FLAT LENGTH |
0.250 INCHES NOMINAL 1ST ACTUATOR |
| ABNB |
FIRST FLAT LENGTH |
0.250 INCHES NOMINAL 2ND ACTUATOR |
| AASA |
THREAD LENGTH |
0.230 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.270 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
3 1ST ACTUATOR |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
3 2ND ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.360 INCHES MINIMUM AT 3:00 O'CLOCK AND 0.390 INCHES MAXIMUM AT 3:00 O'CLOCK |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES 1ST ACTUATOR |
| ABFE |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
EXPLOSION PROOF |
| CQRQ |
SHAFT FLAT/SLOT ANGULAR LOCATION |
195.0 DEGREES FROM NONTURN DEVICE 1ST ACTUATOR |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES 2ND ACTUATOR |
| ABNC |
FLAT HEIGHT |
0.094 INCHES NOMINAL 2ND ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
2 |
| CQRQ |
SHAFT FLAT/SLOT ANGULAR LOCATION |
195.0 DEGREES FROM NONTURN DEVICE 2ND ACTUATOR |
| ADAV |
OVERALL DIAMETER |
1.170 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP ALL ACTUATORS |
| AKPX |
POLE QUANTITY |
1 EACH SECTION FRONT |