| CTHF |
CONTACT LOAD CURRENT RATING |
500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
60.0 DEGREES SINGLE ACTUATOR |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| ABNB |
FIRST FLAT LENGTH |
0.430 INCHES NOMINAL SINGLE ACTUATOR |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
110.0 AC AT SEA LEVEL |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| ABKW |
OVERALL HEIGHT |
1.219 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL |
| AKPY |
THROW QUANTITY |
2 EACH SECTION REAR |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| AFGA |
OPERATING TEMP RANGE |
-55.0/+30.0 DEG CELSIUS |
| CSMW |
DETENT ROTATIONAL TORQUE RANGE |
+3.000/+8.000 INCH-POUNDS SINGLE ACTUATOR |
| AASA |
THREAD LENGTH |
0.230 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.270 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
| ABXF |
SHAFT LENGTH |
0.630 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM SINGLE ACTUATOR AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
2 SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACTS AND TERMINAL SURFACES SILVER |
| AKPX |
POLE QUANTITY |
3 EACH SECTION REAR |
| ABMK |
OVERALL WIDTH |
1.219 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ABNC |
FLAT HEIGHT |
0.213 INCHES MINIMUM SINGLE ACTUATOR AND 0.223 INCHES MAXIMUM SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
3 |
| ABHP |
OVERALL LENGTH |
2.740 INCHES MINIMUM AND 3.020 INCHES MAXIMUM |