| ABWV |
SHAFT DIAMETER |
0.375 INCHES NOMINAL 1ST ACTUATOR |
| ABXF |
SHAFT LENGTH |
1.219 INCHES NOMINAL 2ND ACTUATOR |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
4 2ND ACTUATOR |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| CTHF |
CONTACT LOAD CURRENT RATING |
0.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| AASA |
THREAD LENGTH |
0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
110.0 AC AT SEA LEVEL |
| ABHP |
OVERALL LENGTH |
2.751 INCHES NOMINAL |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 3:00 O'CLOCK |
| ABWV |
SHAFT DIAMETER |
0.123 INCHES MINIMUM 2ND ACTUATOR AND 0.125 INCHES MAXIMUM 2ND ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL AT 3:00 O'CLOCK |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| AKPY |
THROW QUANTITY |
4 1ST SECTION REAR |
| AKPY |
THROW QUANTITY |
3 2ND SECTION REAR |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
| AKPX |
POLE QUANTITY |
2 EACH SECTION REAR |
| ABKW |
OVERALL HEIGHT |
1.312 INCHES NOMINAL |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
ROTOR BLADES AND CONTACTS SILVER |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| ABXF |
SHAFT LENGTH |
0.875 INCHES NOMINAL 1ST ACTUATOR |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| ABMK |
OVERALL WIDTH |
1.281 INCHES NOMINAL |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL AND NONPILE-UP NONSYMMETRICAL |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES 2ND ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
2 |
| FEAT |
SPECIAL FEATURES |
SWITCH IS SUPPLIED WITH COUPLING HAIRPIN,1 DUMMY TERMINAL ON REAR OF SECT 2 AND AN OUTER SHAFT WITH AN INNER HOLE THRU TO PROVIDE A FREE RUNNING INNER SHAFT |
| CRSJ |
SHAFT TYPE |
ROUND, HOLLOWED 1ST ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND 2ND ACTUATOR |