| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| CQRQ |
SHAFT FLAT/SLOT ANGULAR LOCATION |
45.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CQTH |
ROTOR THROUGH CONNECTION QUANTITY |
1 EACH SECTION |
| CTHF |
CONTACT LOAD CURRENT RATING |
2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| CRSJ |
SHAFT TYPE |
ROUND, V FLATTED SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
4 |
| AEFP |
NONTURN DEVICE RADIUS |
0.370 INCHES MINIMUM AT 12:00 O'CLOCK AND 0.380 INCHES MAXIMUM AT 12:00 O'CLOCK |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| CSMW |
DETENT ROTATIONAL TORQUE RANGE |
+1.500/+2.500 INCH-POUNDS SINGLE ACTUATOR |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM SINGLE ACTUATOR AND 0.249 INCHES MAXIMUM SINGLE ACTUATOR |
| AFGA |
OPERATING TEMP RANGE |
-65.0/+125.0 DEG CELSIUS |
| AKPX |
POLE QUANTITY |
2 EACH SECTION REAR |
| CSHW |
CONTACT SWITCHING ACTION |
MAKES BEFORE BREAKS EACH SECTION FRONT |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-3786 SPECIFICATION |
| AASA |
THREAD LENGTH |
0.355 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.395 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES SINGLE MOUNTING FACILITY |
| ABHP |
OVERALL LENGTH |
3.688 INCHES NOMINAL |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
3 SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
ADJUSTABLE STOP SINGLE ACTUATOR |
| ABXF |
SHAFT LENGTH |
0.490 INCHES MINIMUM SINGLE ACTUATOR AND 0.510 INCHES MAXIMUM SINGLE ACTUATOR |
| ABNB |
FIRST FLAT LENGTH |
0.297 INCHES MINIMUM SINGLE ACTUATOR AND 0.327 INCHES MAXIMUM SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
PIN AT 12:00 O'CLOCK |
| ADAV |
OVERALL DIAMETER |
1.323 INCHES MAXIMUM |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| ABFE |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| AKPY |
THROW QUANTITY |
3 EACH SECTION FRONT |