| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| ABHP |
OVERALL LENGTH |
7.562 INCHES NOMINAL |
| CSMW |
DETENT ROTATIONAL TORQUE RANGE |
+2.500/+5.500 INCH-OUNCES SINGLE ACTUATOR |
| ABNB |
FIRST FLAT LENGTH |
0.531 INCHES NOMINAL SINGLE ACTUATOR |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| AASA |
THREAD LENGTH |
0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AKPX |
POLE QUANTITY |
1 EACH SECTION REAR |
| ADAV |
OVERALL DIAMETER |
3.000 INCHES NOMINAL |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| ABXF |
SHAFT LENGTH |
1.625 INCHES NOMINAL SINGLE ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
4 SINGLE ACTUATOR |
| ABNC |
FLAT HEIGHT |
0.219 INCHES NOMINAL SINGLE ACTUATOR |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
150.0 AC AT SEA LEVEL |
| CQRQ |
SHAFT FLAT/SLOT ANGULAR LOCATION |
0.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.228 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CTHF |
CONTACT LOAD CURRENT RATING |
15.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| AEFP |
NONTURN DEVICE RADIUS |
0.500 INCHES NOMINAL AT 3:00 O'CLOCK |
| CQYJ |
MOUNTING FACILITY PATTERN |
THREE POSITION CIRCULAR SINGLE MOUNTING FACILITY |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| TEST |
TEST DATA DOCUMENT |
02769-751434 DRAWING |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| AKPY |
THROW QUANTITY |
4 EACH SECTION REAR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
PIN AT 3:00 O'CLOCK |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
3 |
| ALAQ |
MOUNTING FACILITY CIRCLE RADIUS |
1.780 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 1.880 INCHES MAXIMUM SINGLE MOUNTING FACILITY |