| CTHF |
CONTACT LOAD CURRENT RATING |
250.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
45.0 DEGREES SINGLE ACTUATOR |
| CTHF |
CONTACT LOAD CURRENT RATING |
75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CQTH |
ROTOR THROUGH CONNECTION QUANTITY |
1 EACH SECTION |
| ABFE |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
EXPLOSION PROOF AND WATERTIGHT |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
4 |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| AKPY |
THROW QUANTITY |
2 EACH SECTION REAR |
| AASA |
THREAD LENGTH |
0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AFGA |
OPERATING TEMP RANGE |
-65.0/+125.0 DEG CELSIUS |
| ABNB |
FIRST FLAT LENGTH |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-3786/4 GOVERNMENT SPECIFICATION |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-3786 SPECIFICATION |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| AFDC |
NONTURN DEVICE TYPE |
SLOTTED BUSHING AT 3:00 O'CLOCK |
| ABHP |
OVERALL LENGTH |
2.937 INCHES NOMINAL |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
8 SINGLE ACTUATOR |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| ABXF |
SHAFT LENGTH |
0.437 INCHES NOMINAL SINGLE ACTUATOR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| ADAV |
OVERALL DIAMETER |
1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM |
| ABNC |
FLAT HEIGHT |
0.216 INCHES NOMINAL SINGLE ACTUATOR |
| CSMW |
DETENT ROTATIONAL TORQUE RANGE |
+0.500/+2.500 INCH-POUNDS SINGLE ACTUATOR |
| CQRQ |
SHAFT FLAT/SLOT ANGULAR LOCATION |
195.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| AKPX |
POLE QUANTITY |
1 EACH SECTION FRONT |