| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| STYL |
STYLE DESIGNATOR |
SNAP OR LINE |
| ABNB |
FIRST FLAT LENGTH |
0.135 INCHES MINIMUM SINGLE ACTUATOR AND 0.155 INCHES MAXIMUM SINGLE ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AASA |
THREAD LENGTH |
0.235 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.265 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL |
| AFDC |
NONTURN DEVICE TYPE |
FLATTED BUSHING AT 3:00 O'CLOCK |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| CSCF |
TERMINAL TYPE |
PIN AND PRINTED CIRCUIT |
| ABHP |
OVERALL LENGTH |
0.962 INCHES MAXIMUM |
| ABNC |
FLAT HEIGHT |
0.084 INCHES MINIMUM SINGLE ACTUATOR AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
FLATTED BUSHING AT 9:00 O'CLOCK |
| CTHF |
CONTACT LOAD CURRENT RATING |
200.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| AKPY |
THROW QUANTITY |
6 SINGLE SECTION REAR |
| CSMW |
DETENT ROTATIONAL TORQUE RANGE |
+0.220/+0.440 INCH-POUNDS SINGLE ACTUATOR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
1 |
| AKPX |
POLE QUANTITY |
2 SINGLE SECTION REAR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| ABFE |
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
EXPLOSION PROOF |
| AFGA |
OPERATING TEMP RANGE |
-55.0/+85.0 DEG CELSIUS |
| ABXF |
SHAFT LENGTH |
0.155 INCHES MINIMUM SINGLE ACTUATOR AND 0.175 INCHES MAXIMUM SINGLE ACTUATOR |
| ADAV |
OVERALL DIAMETER |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
6 SINGLE ACTUATOR |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| THSD |
THREAD SERIES DESIGNATOR |
UNF SINGLE MOUNTING FACILITY |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES SINGLE MOUNTING FACILITY |
| ABWV |
SHAFT DIAMETER |
0.123 INCHES MINIMUM SINGLE ACTUATOR AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR |