| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES LAMP LOAD SECOND VOLTAGE |
| CTZB |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL FIRST VOLTAGE |
| FREQ |
FREQUENCY IN HERTZ |
60.0 FIRST VOLTAGE |
| ABTD |
MOUNTING SLOT WIDTH |
0.140 INCHES NOMINAL |
| AWTN |
OPERATING TEMP RATING |
-65.0 DEG FAHRENHEIT MINIMUM AND 500.0 DEG FAHRENHEIT MAXIMUM |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| CTYX |
CONTACT STIMULUS RATING |
150.00 ACTUATION POINT NOMINAL DEGREES FAHRENHEIT AND 135.00 DEACTUATION POINT NOMINAL DEGREES FAHRENHEIT |
| CTZB |
CONTACT VOLTAGE RATING IN VOLTS |
28.0 DC AT SEA LEVEL SECOND VOLTAGE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-24236/1 GOVERNMENT SPECIFICATION |
| AEJN |
DISTANCE BETWEEN MOUNTING FACILITY CENTERS |
0.937 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
SLOT AND BRACKET AND UNTHREADED HOLE |
| CQGB |
CONTACT ACTION STIMULUS |
INCREASE |
| MEDA |
MEDIA FOR WHICH DESIGNED |
GAS OR LIQUID |
| CTHF |
CONTACT LOAD CURRENT RATING |
2.5 AMPERES INDUCTIVE LOAD SECOND VOLTAGE AND 1.0 AMPERES INDUCTIVE LOAD FIRST VOLTAGE AND 2.0 AMPERES RESISTIVE LOAD FIRST VOLTAGE AND 5.0 AMPERES RESISTIVE LOAD SECOND VOLTAGE AND 0.5 AMPERES LAMP LOAD FIRST VOLTAGE |
| CRLD |
NONPILE-UP CONTACT ARRANGEMENT |
1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| ADAU |
BODY HEIGHT |
0.260 INCHES MINIMUM AND 0.325 INCHES MAXIMUM |
| AKBY |
TEMP SENSING ELEMENT TYPE |
INTERNAL SENSOR |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-S-24236 SPECIFICATION |
| CBBL |
FEATURES PROVIDED |
HERMETICALLY SEALED CASE |
| CTYC |
CONTACT ADJUSTABILITY |
ACTUATION POINT NOT ADJUSTABLE AND DEACTUATION POINT NOT ADJUSTABLE |
| ABPM |
BODY DIAMETER |
0.640 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
SURFACE ANTI-SUBMARINE WARFARE COMBAT SYSTEM AN/SQQ-89(V) |
| ABKW |
OVERALL HEIGHT |
0.638 INCHES NOMINAL |
| CQYJ |
MOUNTING FACILITY PATTERN |
TWO POSITION IN-LINE |
| ABHP |
OVERALL LENGTH |
1.160 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
DISC W/FLANGE |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.140 INCHES NOMINAL |