| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AWTN |
OPERATING TEMP RATING |
-67.0 DEG FAHRENHEIT MINIMUM AND 300.0 DEG FAHRENHEIT MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.061 GOLD GRAINS, TROY |
| CXCG |
INCLUDED CONTACT QUANTITY |
61 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG |
INSERT MATERIAL |
RUBBER SILICONE CLASS Q SINGLE MATING END |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND HUMIDITY RESISTANT |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TYPE II,CLASS 2 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
3.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK |
OVERALL WIDTH |
1.173 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
19-33 SINGLE MATING END |