| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
40394 SINGLE MATING END |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
600.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| ABMK |
OVERALL WIDTH |
0.838 INCHES MAXIMUM |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.020 GOLD GRAINS, TROY |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND MOISTURE PROOF AND VIBRATION RESISTANT |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRP |
INSERT POSITION IN DEG |
45.0 |
| ABKW |
OVERALL HEIGHT |
0.838 INCHES MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.594 INCHES NOMINAL |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
10.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-26482 SPECIFICATION |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.431 INCHES MINIMUM AND 0.462 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
4 SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
2.271 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.594 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS3110 GOVERNMENT STANDARD |