| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
10 SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.010 GOLD GRAINS, TROY AND 0.010 SILVER GRAINS, TROY |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL |
| AFQW |
MATING END QUANTITY |
1 |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.421 INCHES MINIMUM AND 0.441 INCHES MAXIMUM |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
10-DEC SINGLE MATING END |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT |
SHELL TYPE |
SOLID |
| ABKW |
OVERALL HEIGHT |
1.021 INCHES MINIMUM AND 1.041 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.021 INCHES MINIMUM AND 1.041 INCHES MAXIMUM |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| FEAT |
SPECIAL FEATURES |
BACK GROMMET |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
7.5 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND VIBRATION RESISTANT |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD AND SILVER |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| CQZG |
INSERT MATERIAL |
RUBBER NATURAL SINGLE MATING END |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |