| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| CMLP |
THREAD QUANTITY PER INCH |
36 |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.105 GOLD GRAINS, TROY |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
GOLD AND NICKEL |
| CSPT |
SHELL MATERIAL |
STEEL COMP 303 |
| CSCF |
TERMINAL TYPE |
THREADED STUD SINGLE MATING END SINGLE CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| AFRT |
SHELL TYPE |
SOLID |
| ABMK |
OVERALL WIDTH |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACE AND SHELL SURFACE GOLD |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFRY |
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS |
50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
0.525 INCHES NOMINAL |
| CQZG |
INSERT MATERIAL |
PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
NONSTD SINGLE MATING END |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.310 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK RESISTANT AND MOISTURE RESISTANT AND CORROSION RESISTANT AND VIBRATION RESISTANT |
| ABKH |
BUSHING DIAMETER |
0.208 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
1 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |