| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.151 INCHES MINIMUM AND 1.161 INCHES MAXIMUM |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| ABMK |
OVERALL WIDTH |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
20-17 SINGLE MATING END |
| CQZG |
INSERT MATERIAL |
RUBBER SYNTHETIC SINGLE MATING END |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| AKMG |
NOMINAL THREAD LENGTH |
0.625 INCHES |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQJX |
NOMINAL THREAD SIZE |
1.250 INCHES |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| AAJD |
THREAD CLASS |
2A |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG |
INCLUDED CONTACT QUANTITY |
1 SINGLE MATING END 1ST CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
5 SINGLE MATING END 2ND CONTACT GROUPING |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.151 INCHES MINIMUM AND 1.161 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END 1ST CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
1.938 INCHES MAXIMUM |
| TEST |
TEST DATA DOCUMENT |
81349-MILC5015 SPECIFICATION |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
41.0 SINGLE MATING END 2ND CONTACT GROUPING |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |