| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.125 INCHES MAXIMUM |
| CXCL |
INCLUDED CONTACT TYPE |
COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQW |
MATING END QUANTITY |
1 |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.094 INCHES NOMINAL |
| AFRT |
SHELL TYPE |
SOLID |
| AFRY |
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS |
50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG |
INSERT MATERIAL |
PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
BNC SINGLE MATING END |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,COMP 22 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| CSPT |
SHELL MATERIAL |
COPPER |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACTSURFACE GOLD AND BODY SURFACE SILVER |
| AFQL |
DISTANCE FROM MOUNTING SHOULDER TO REAR FACE |
0.360 INCHES NOMINAL |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKH |
BUSHING DIAMETER |
0.312 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
GOLD AND SILVER |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK |
OVERALL WIDTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| CSWM |
SHELL SURFACE TREATMENT |
SILVER |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.101 GOLD GRAINS, TROY AND 0.101 SILVER GRAINS, TROY |
| AAQL |
BODY STYLE |
ANGLE SHAPE, EXTERNAL COUPLING |
| AFQN |
FLANGE LENGTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
1 SINGLE MATING END SINGLE CONTACT GROUPING |