| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
3 SINGLE MATING END SINGLE CONTACT GROUPING |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| CQZG |
INSERT MATERIAL |
RUBBER SINGLE MATING END |
| AFQW |
MATING END QUANTITY |
1 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| ABMK |
OVERALL WIDTH |
0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| ABHP |
OVERALL LENGTH |
1.588 INCHES MAXIMUM |
| AKMG |
NOMINAL THREAD LENGTH |
0.391 INCHES |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
3 SINGLE MATING END |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.562 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| ABKW |
OVERALL HEIGHT |
0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.015 SILVER GRAINS, TROY |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
COMPRESSION NUT |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.714 INCHES MINIMUM AND 0.724 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| ADZC |
ENVIRONMENTAL PROTECTION |
VIBRATION RESISTANT AND WEATHER RESISTANT |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.118 INCHES MINIMUM AND 0.124 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY II CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |