| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD AND CONTACT SURFACE SILVER |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.008 GOLD GRAINS, TROY AND 0.008 SILVER GRAINS, TROY |
| CQZG |
INSERT MATERIAL |
RUBBER SINGLE MATING END |
| AFQW |
MATING END QUANTITY |
1 |
| AAJD |
THREAD CLASS |
2A AND 2A |
| CXCG |
INCLUDED CONTACT QUANTITY |
8 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| AKMG |
NOMINAL THREAD LENGTH |
0.438 INCHES AND 0.625 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
18 AND 18 |
| ABHP |
OVERALL LENGTH |
2.438 INCHES MAXIMUM |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| ABMK |
OVERALL WIDTH |
2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.168 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND AND RIGHT-HAND |
| AFQR |
THREADED DEVICE TYPE |
BACK SHELL AND COUPLING FACILITY |
| ABKW |
OVERALL HEIGHT |
2.219 INCHES MINIMUM AND 2.281 INCHES MAXIMUM |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQJX |
NOMINAL THREAD SIZE |
1.750 INCHES AND 2.000 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNS AND UNS |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.875 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD AND SILVER |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |