| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.462 INCHES MINIMUM AND 0.472 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.825 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| AFQW |
MATING END QUANTITY |
1 |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.031 INCHES NOMINAL |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CQZG |
INSERT MATERIAL |
RUBBER CHLOROPRENE CLASS CR SINGLE MATING END |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS |
| ABKW |
OVERALL HEIGHT |
1.328 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG |
INCLUDED CONTACT QUANTITY |
14 SINGLE MATING END 2ND CONTACT GROUPING |
| AFRP |
INSERT POSITION IN DEG |
155.0 |
| AFRT |
SHELL TYPE |
SOLID |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS |
| ABMK |
OVERALL WIDTH |
1.328 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
7.5 SINGLE MATING END 2ND CONTACT GROUPING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG |
INCLUDED CONTACT QUANTITY |
1 SINGLE MATING END 1ST CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.015 SILVER GRAINS, TROY |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.031 INCHES NOMINAL |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END 1ST CONTACT GROUPING |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
14-15 SINGLE MATING END |