| CMLP |
THREAD QUANTITY PER INCH |
24 |
| ADZC |
ENVIRONMENTAL PROTECTION |
VIBRATION RESISTANT AND SALT WATER RESISTANT |
| AFQW |
MATING END QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD AND CONTACT SURFACES AND SHELLSURFACE SILVER |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT |
SHELL TYPE |
SOLID |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE W/CABLE CLAMP |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.005 GOLD GRAINS, TROY AND 0.105 SILVER GRAINS, TROY |
| CXCL |
INCLUDED CONTACT TYPE |
COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,COMP @360 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,COMP 360 FED SPEC SINGLE MATERIAL RESPONSE |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
N SINGLE MATING END |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| CSPT |
SHELL MATERIAL |
COPPER ALLOY |
| ABKW |
OVERALL HEIGHT |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQS-365,TYPE 2,GRADE A FED SPEC SINGLE TREATMENT RESPONSE |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
COMPRESSION NUT |
| CQJX |
NOMINAL THREAD SIZE |
0.625 INCHES |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.713 INCHES MINIMUM AND 0.723 INCHES MAXIMUM |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD AND SILVER |
| ABKH |
BUSHING DIAMETER |
0.535 INCHES MINIMUM AND 0.545 INCHES MAXIMUM |
| CSWM |
SHELL SURFACE TREATMENT |
SILVER |
| CXCG |
INCLUDED CONTACT QUANTITY |
1 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |