| CMLP |
THREAD QUANTITY PER INCH |
4 |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.026 SILVER GRAINS, TROY |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY 6061 |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK PROOF AND DUST RESISTANT AND CORROSION RESISTANT AND THERMAL SHOCK RESISTANT AND OIL RESISTANT AND VIBRATION RESISTANT |
| AFQW |
MATING END QUANTITY |
1 |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END ALL CONTACT GROUPINGS |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,ALLOY 6061,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.688 INCHES NOMINAL |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.720 INCHES NOMINAL |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 3,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| ABMK |
OVERALL WIDTH |
2.219 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B140,ALLOY B ASSN STD SINGLE MATERIAL RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 2ND MATING END SINGLE CONTACT GROUPING |
| ABKW |
OVERALL HEIGHT |
2.219 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| THSD |
THREAD SERIES DESIGNATOR |
SPECIAL ACME |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG |
INCLUDED CONTACT QUANTITY |
2 SINGLE MATING END 1ST CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
16-24 SINGLE MATING END |
| CSWM |
SHELL SURFACE TREATMENT |
ANODIZE |
| ABHP |
OVERALL LENGTH |
2.324 INCHES NOMINAL |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END ALL CONTACT GROUPINGS |
| CQZG |
INSERT MATERIAL |
PLASTIC PHENOLIC SINGLE MATING END |
| CQJX |
NOMINAL THREAD SIZE |
2.000 INCHES |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
57.0 1ST MATING END SINGLE CONTACT GROUPING |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
COMPRESSION NUT |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CXCG |
INCLUDED CONTACT QUANTITY |
16 SINGLE MATING END 2ND CONTACT GROUPING |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.688 INCHES NOMINAL |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| AAJD |
THREAD CLASS |
2G |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-M-14,TYPE MFH MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |