| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.019 GOLD GRAINS, TROY |
| CQJX |
NOMINAL THREAD SIZE |
1.375 INCHES |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| CQZG |
INSERT MATERIAL |
RUBBER SINGLE MATING END |
| AFQW |
MATING END QUANTITY |
1 |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| AFRP |
INSERT POSITION IN DEG |
110.0 |
| AKMG |
NOMINAL THREAD LENGTH |
0.625 INCHES |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
22-14 SINGLE MATING END |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.118 INCHES MINIMUM AND 0.124 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
19 SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
1.532 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT |
1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |