| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCG |
INCLUDED CONTACT QUANTITY |
3 SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
700.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CMLP |
THREAD QUANTITY PER INCH |
20 AND 10 |
| CQZG |
INSERT MATERIAL |
RUBBER SINGLE MATING END |
| AFQW |
MATING END QUANTITY |
1 |
| ADZC |
ENVIRONMENTAL PROTECTION |
EXPLOSION PROOF AND SALT WATER RESISTANT |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
14S-7 SINGLE MATING END |
| AAJD |
THREAD CLASS |
2A AND 2A |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
22.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF AND DOUBLE STUB |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| ABHP |
OVERALL LENGTH |
1.094 INCHES NOMINAL |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.148 INCHES MINIMUM AND 0.154 INCHES MAXIMUM |
| AFRT |
SHELL TYPE |
SOLID |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.003 SILVER GRAINS, TROY |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND AND RIGHT-HAND |
| AFQR |
THREADED DEVICE TYPE |
BACK SHELL AND COUPLING FACILITY |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
ANODIZE |
| ABMK |
OVERALL WIDTH |
1.168 INCHES MINIMUM AND 1.208 INCHES MAXIMUM |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW |
OVERALL HEIGHT |
1.168 INCHES MINIMUM AND 1.208 INCHES MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.562 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES AND 0.875 INCHES |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |