| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.405 INCHES MAXIMUM |
| CXCG |
INCLUDED CONTACT QUANTITY |
8 SINGLE MATING END 2ND CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF |
| AFQR |
THREADED DEVICE TYPE |
BACK SHELL |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS3470 GOVERNMENT STANDARD |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.012 GOLD GRAINS, TROY |
| CXCG |
INCLUDED CONTACT QUANTITY |
4 SINGLE MATING END 1ST CONTACT GROUPING |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END ALL CONTACT GROUPINGS |
| AAJD |
THREAD CLASS |
2A |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END ALL CONTACT GROUPINGS |
| AKMG |
NOMINAL THREAD LENGTH |
0.290 INCHES |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| ABMK |
OVERALL WIDTH |
1.141 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.141 INCHES MAXIMUM |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
14-12 SINGLE MATING END |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-26482 SPECIFICATION |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.431 INCHES MINIMUM AND 0.462 INCHES MAXIMUM |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |