| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW |
OVERALL HEIGHT |
1.677 INCHES MINIMUM AND 1.697 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| AFQW |
MATING END QUANTITY |
1 |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
2.875 INCHES NOMINAL |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| CSLR |
GUIDE DESIGN AND LOCATION |
D SHAPE PIN LEFT-HAND AT 12 OCLOCK AND D SHAPE PIN RIGHT-HAND AT 12 OCLOCK |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.152 INCHES NOMINAL |
| AFRT |
SHELL TYPE |
SOLID |
| CXCG |
INCLUDED CONTACT QUANTITY |
14 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.000 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.062 INCHES NOMINAL |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| CXCL |
INCLUDED CONTACT TYPE |
COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
14 SINGLE MATING END |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG |
INSERT MATERIAL |
PLASTIC PHENOLIC SINGLE MATING END |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
1.099 INCHES MINIMUM AND 1.119 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, FLUSH MOUNT |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE RESISTANT |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.014 SILVER GRAINS, TROY |
| AFRN |
POLARIZATION METHOD |
2 POLARIZATION POSTS |