| AAQL |
BODY STYLE |
STRAIGHT SHAPE, INTERNAL COUPLING |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
PRECIOUS MATERIAL |
SILVER |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| AFQW |
MATING END QUANTITY |
1 |
| ABKW |
OVERALL HEIGHT |
2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/5 FED SPEC SINGLE MATERIAL RESPONSE |
| AGAV |
END ITEM IDENTIFICATION |
MEP 404B GENERATOR SET PROVISIONING,GROUND LAUNCH CRUISE MISSILE (GLCM) SUPPORT |
| CQZG |
INSERT MATERIAL |
RUBBER CHLOROPRENE CLASS CR SINGLE MATING END |
| ABMK |
OVERALL WIDTH |
2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES SILVER |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| AFRT |
SHELL TYPE |
SOLID |
| AFRV |
CONNECTOR LOCKING METHOD |
INTERNALLY THREADED COUPLING RING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.746 INCHES MINIMUM AND 1.754 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AKMG |
NOMINAL THREAD LENGTH |
0.173 INCHES |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CQJX |
NOMINAL THREAD SIZE |
2.000 INCHES |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.020 SILVER GRAINS, TROY |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.746 INCHES MINIMUM AND 1.754 INCHES MAXIMUM |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
32-17 SINGLE MATING END |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AAJD |
THREAD CLASS |
2B |
| CXCG |
INCLUDED CONTACT QUANTITY |
4 SINGLE MATING END SINGLE CONTACT GROUPING |