| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.250 INCHES NOMINAL |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING STRAIN RELIEF |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFQW |
MATING END QUANTITY |
1 |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.250 INCHES NOMINAL |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-591,A380 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
600.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ADAQ |
BODY LENGTH |
2.344 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.578 INCHES MAXIMUM |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT WATER RESISTANT AND MOISTURE PROOF AND VIBRATION PROOF |
| AFRP |
INSERT POSITION IN DEG |
0.0 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
| AFRT |
SHELL TYPE |
SOLID |
| AFRN |
POLARIZATION METHOD |
KEYWAY OR MULTIPLE KEYWAY |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TYPE 1,CLASS 1,GRADE C MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND QQ-N-290,GRADE E FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
22-21 SINGLE MATING END |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCG |
INCLUDED CONTACT QUANTITY |
21 SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK |
OVERALL WIDTH |
1.578 INCHES MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.556 INCHES MINIMUM AND 0.587 INCHES MAXIMUM |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRW |
CONNECTOR CABLE STRAIN RELIEF METHOD |
CABLE CLAMP |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-C-26482 SPECIFICATION |
| AFQJ |
CABLE ENTRANCE DIAMETER |
0.750 INCHES NOMINAL |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.021 GOLD GRAINS, TROY |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS3110 GOVERNMENT STANDARD |