| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| CQYH |
CONTACT SURFACE TREATMENT |
SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-S-365,TYPE 1,GRADE A FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE |
| CXCL |
INCLUDED CONTACT TYPE |
COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG |
INSERT MATERIAL |
PLASTIC SINGLE MATING END |
| AFQW |
MATING END QUANTITY |
1 |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKH |
BUSHING DIAMETER |
0.378 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.622 INCHES MINIMUM AND 0.628 INCHES MAXIMUM |
| AFRT |
SHELL TYPE |
SOLID |
| ABKW |
OVERALL HEIGHT |
0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.057 INCHES NOMINAL |
| AFRY |
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS |
50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK |
OVERALL WIDTH |
0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
BNC SINGLE MATING END |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
COPPER ALLOY |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM |
SHELL SURFACE TREATMENT |
SILVER |
| AFRF |
CONTACT MAXIMUM FREQUENCY RATING |
4000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-S-365,TYPE 1,GRADE A FED SPEC SINGLE TREATMENT RESPONSE |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.499 INCHES MINIMUM AND 0.501 INCHES MAXIMUM |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE RESISTANT |
| CXCG |
INCLUDED CONTACT QUANTITY |
1 SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.099 INCHES NOMINAL |
| AFRE |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |