| CMLP |
THREAD QUANTITY PER INCH |
36 |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| CSWM |
SHELL SURFACE TREATMENT |
PASSIVATE |
| ABMK |
OVERALL WIDTH |
0.500 INCHES NOMINAL |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| CXCL |
INCLUDED CONTACT TYPE |
COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQW |
MATING END QUANTITY |
1 |
| ABKH |
BUSHING DIAMETER |
0.162 INCHES NOMINAL |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TY 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
L-P-389 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END OR L-P-403 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| AFRD |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS |
500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
SMA SINGLE MATING END |
| ABKW |
OVERALL HEIGHT |
0.670 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| AFQL |
DISTANCE FROM MOUNTING SHOULDER TO REAR FACE |
0.185 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
0.750 INCHES MAXIMUM |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFAC GOLD |
| THSD |
THREAD SERIES DESIGNATOR |
UNS |
| AFRT |
SHELL TYPE |
SOLID |
| AFQR |
THREADED DEVICE TYPE |
COUPLING FACILITY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AFRY |
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS |
50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CTHH |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,CLASS 303,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE |
| CSCF |
TERMINAL TYPE |
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.005 GOLD GRAINS, TROY |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
STEEL CORROSION RESISTING |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| AAJD |
THREAD CLASS |
2A |
| CTBC |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35,TY 1,2,OR 3 FED SPEC SINGLE TREATMENT RESPONSE |
| AFQN |
FLANGE LENGTH |
0.500 INCHES NOMINAL |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.340 INCHES NOMINAL |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.102 INCHES NOMINAL |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG |
INSERT MATERIAL |
PLASTIC FLUORINATED ETHYLENE PROPYLENE SINGLE MATING END OR PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
0.340 INCHES NOMINAL |
| AAQL |
BODY STYLE |
ANGLE SHAPE, EXTERNAL COUPLING |
| CXCG |
INCLUDED CONTACT QUANTITY |
1 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRV |
CONNECTOR LOCKING METHOD |
EXTERNALLY THREADED SHELL |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK RESISTANT AND PRESSURE PROOF |