| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.078 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.766 INCHES MINIMUM AND 1.796 INCHES MAXIMUM |
| PRMT |
PRECIOUS MATERIAL |
GOLD |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL |
| AFQW |
MATING END QUANTITY |
1 |
| AFRP |
INSERT POSITION IN DEG |
50.0 |
| CXCG |
INCLUDED CONTACT QUANTITY |
12 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT |
SHELL TYPE |
SOLID |
| AFRY |
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS |
50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
PRECIOUS MATERIAL AND WEIGHT |
0.012 GOLD GRAINS, TROY |
| CXCL |
INCLUDED CONTACT TYPE |
COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| ABKW |
OVERALL HEIGHT |
1.766 INCHES MINIMUM AND 1.796 INCHES MAXIMUM |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
61-21 SINGLE MATING END |
| CSWM |
SHELL SURFACE TREATMENT |
CHROMATE |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| PMLC |
PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACE GOLD |
| AFRV |
CONNECTOR LOCKING METHOD |
SPRING FRICTION |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| CQZG |
INSERT MATERIAL |
PLASTIC SILICONE SINGLE MATING END |